Banana Pi M2+ is based on H3 ARM Quad-Core CPU. It has WiFi, Bluetooth and onboard storage.
Banana Pi M2+ is another ARM SoC powered development board that offers great computing performance in an ultra-portable form factor. It is a 65mm square with Allwinner H3 Quad-core A7 SoC and 1GB DDR3 RAM.
This board offers basic hardware interfaces such as USB, HDMI, USB OTG, DC, Gigabit Ethernet, WiFi, BT, Camera interface, and a 40 pin array.
The M2+ is a development board that has the H3 SoC, which is optimized for media consumption. The M2+ is meant to be set up as a media player or a Linux microcomputer.
- Allwinner H3 Quad-core 1.2GHz Cortex-A7 (option H2+ H5).
- 1GB DDR3
- 8GB eMMC onboard
- HDMI out
- WiFi and BlueTooth onboard
- 10/100/1000Mbps Ethernet Port
- CSI camera interface
|CPU||H3 Quad-core Cortex-A7 H.265/HEVC 4K|
|GPU||Mali400MP2 GPU @600MHz,Supports OpenGL ES 2.0|
|Memory||1GB DDR3 (SDRAM shared with GPU)|
|Storage Support||MicroSD card (Max. 64GB), 8GB EMMC Flash|
|Onboard Network||10/100/1000 Ethernet RJ45 Realtek RTL8211E|
|WiFi||b/g/n Ampak AP6212|
|Video In||CSI connector for 8-bit YUV42 CMOS sensor and capture of 1080p@30fps|
|Power Source||DC 5V @ 2A (4.0mm/1.7mm barrel plug - centre positive)|
|USB Ports||2x USB 2.0|
|Buttons||Power Button, Reset Button, Uboot Button|
|GPIO||3 pin UART, CSI, 40 pins GPIO|
|OS||Android, Raspbian, Ubuntu, OpenSUSE, Debian, Bananian|
|Dimensions||65mm × 65mm (Approx.)|
BPI M2+ GPIO Pin Define
- Linux kernel 4.4 on Github: https://github.com/BPI-SINOVOIP/BPI-M2P-bsp-4.4
- Linux kernel 3.4 on Github: https://github.com/BPI-SINOVOIP/BPI-M2P-bsp
- 1 x Banana Pi M2+